PCI-DMC-A01/B01 User Guide
Chapter 2 Installation Guide
2-2
July 2014
2.2 Hardware Installation
Hardware Configuration
PCI-DMC-01 is treated as a standard Plug and Play device by the PC. Basic
system functions such as memory allocation and I/O port assignments can all be
managed through BIOS of the PC system. The user does not need to configure
the hardware directly.
PCI Slot Selection
When the PC system has both built-in ISA and PCI expansion slots, please take
care not to insert this product into an ISA expansion slot! The card is not only
physically incompatible but is also designed for use with PCI only, so it will only
work normally in a PCI expansion slot.
Motion Card Installation
Step 1: Turn off the main power supply of the computer in which the PCI-DMC-01
will be installed, and disconnect any peripherals such as printers and
monitors. Confirm that the power supply is connected to the computer and
is grounded.
Step 2: Touch the back plate of the system case to discharge any static electricity
on your body. Once done, disconnect the system's power supply.
Step 3: Open the system case, choose an empty PCI slot and remove the
corresponding back plate. Watch out for any sharp edges on the metal
plating during the removal process.
Step 4: Remove PCI-DMC-01 from its packaging while keeping one hand touching
the metallic part of the system case. This action is intended to earth any
static electricity on your body through the system case. Make sure that you
do not touch any of the components on the card to avoid electro-static
damage. Put on rubber gloves and pick up the PCI-DMC-01 card in the
manner shown in Figure 2.1.
