Chapter 5 : InsightPower SNMP IPv6 for EnviroStation Web
46
For EnviroProbe 1100 (EMS1100)
The EnviroProbe 1100 (EMS1100) provides four digital outputs. In this page,
select
an
ID
first and then set up
Title
and
Type
. Click
Enable
if you wish to
enable the device. Please note that the
ID
means the ID No. you set up for
your EnviroProbe 1100 (EMS1100) using its ID DIP switches (please see
3.3
EnviroProbe
). You can set up each digital output’s
Operation
,
Period
and
Title
. Select
Automatic
to enable automatic linking between a specific digital
output and
Reaction
(please see
5.2.1 Management - Reaction
). Select
Manual
to set the specific digital output status by clicking the
Normal
and
Alarm
buttons.
The digital output changes its status during the period of time specified in the
Period
box. The original digital status resumes after the given duration. If the
specified
Period
is 0, the original digital status does not resume automatically
unless you manually click the
Normal
button or set up
Reaction
(please see
5.2.1 Management - Reaction
).
