Delta DX-2100 Series, Руководство пользователя

Страница: 68 / 154

D X - 2 1 0 0 S e r i e s I n d u s t r i a l 3 G C l o u d R o u t e r
3 - 3 2
_3
Description Default
Controller
In master mode, device types options are:

Delta PLC: Use this option for Delta DVP / AH / AS series PLCs

Other: Use this option for non-Delta PLCs. HEX means hexadecimal
address; DEC means decimal address.
Delta DVP PLC
Address Type
In master mode, the address type would changes with different options of
controller type:

Delta PLC: address types would be D/M/S/X/Y, which D is a word type and
M/S/X/Y are of bit type.

Other: Address type is 0x/1x/3x/4x/Swap
a)
0x: Coils(Modbus function code: 01/05), read-write.
b)
1x: Discrete Inputs(Modbus function code: 02), read only.
c)
3x: Input Registers (Modbus function code: 04) , read only.
d)
4x: Holding Registers (Modbus function code: 03/16), read-write.
e)
Swap: If using “double words” to read/write “holding registers”, before
reading or writing, the values in Hi Word and Low Word will be
swapped first.
D
Slave Starting Address (decimal)
Set the slave starting address for read/write the registers in a PLC.

Delta PLC: Enter the internal D register number. If you need to read / write
D0, please enter 0 here.

Other: Enter the Hexadecimal or Decimal actual address. For example:
Holding Register: 400100, take 0100 (decimal) that is 64 (hex).
N/A
Bit
For the X/Y type of Delta AH/AS series, the address input format is 0.0~X.15.
Enter the values before decimal point in the input field of Slave Starting
Address, while values after decimal point should be entered in the input field of
Bit.
N/A
Device Starting Address (decimal)
Set up the device starting address (decimal, input range is from $2048 to
$4095). Must start at the beginning of a Device Starting Address with a “$” or
“M”.
N/A
Length (1-123)
Set the number of continuous addresses followed by the starting address which
will be read or write, ranging from 1 to 123.
N/A
Operation
Click the +/- button to add mapping or delete mapping. N/A
Edit
Click an item of register mapping forms that can be edited. N/A