Delta 36-889, Инструкция по эксплуатации, Страница: 2 / 20

2
INTRODUCTION
The model 36-889, 52” capacity Unifence™ Saw Guide can be assembled to the Delta 10” Tilting Arbor Saw, 10”
Unisaw, Contractors Saw, in addition to other makes of table saws. The 36-889 Unifence Saw Guide includes the fence,
carriage assembly, front guide rail, table frame and legs. The accessory 34-998 table and shelf for the 36-889 52"
Unifence are not included with the 36-889 Unifence™ Saw Guide and must be ordered separately or a similar table and
shelf board must be constructed by following the instructions in this manual.
UNPACKING
Carefully unpack the Unifence and all loose items from the shipping cartons.
Fig. 1
1. Rail
2. Table Support Bracket (2)
3. Fence
4. Unifence Body
5. Shelf Support Bracket (2)
6. Table Adapter Plate
7. Table Leg (2)
8. 1/4-20x2" Flip stop bolt
9. Flip stop bracket
10. 5/16-18x1" Hex head bolt
11. Flip stop
12. Flip stop knob
13. 1/4-20 Nut
14. Flip stop fiber washer (2)
15. Unifence cursor
If you purchased the Unifence without the table, a table and shelf must be constructed, as follows:
1. A 48" long by 27" wide table is constructed using 3/4" material by following the dimensions shown in Fig. 2. A 40"
long by 15" wide lower shelf is constructed using 3/4" material by following the dimensions shown in Fig. 4.
2. Three undercuts must also be made on the bottom left side of the table. The location of these undercuts is shown
in Fig. 2, and the size of the undercuts is shown in detail in Fig. 3.
3. IMPORTANT: For maximum ease when sliding the fence across the table we suggest that the top of the table be
covered with a veneer.
CONSTRUCTING UNIFENCE TABLE AND SHELF
1
3
2
4
5
6
7
8
9
10
11
12
13
14
13
14
10
9
8
12
11
15