Delta 32-325, Инструкция по эксплуатации

Страница: 6 / 52

6
EXTENSION CORDS
Use proper extension cords. Make sure
your extension cord is in good condition and is a 3-wire
extension cord which has a 3-prong grounding type
plug and matching receptacle which will accept the
machine’s plug. When using an extension cord, be sure
to use one heavy enough to carry the current of the
machine. An undersized cord will cause a drop in line
voltage, resulting in loss of power and overheating. Fig.
D-1 shows the correct gauge to use depending on the
cord length. If in doubt, use the next heavier gauge. The
smaller the gauge number, the heavier the cord.
Fig� D-1
MINIMUM GAUGE EXTENSION CORD
RECOMMENDED SIZES FOR USE WITH STATIONARY ELECTRIC MACHINES
Ampere Total Length Gauge of
Rating Volts of Cord in Feet Extension Cord
0-6 120 up to 25 18 AWG
0-6 120 25-50 16 AWG
0-6 120 50-100 16 AWG
0-6 120 100-150 14 AWG
6-10 120 up to 25 18 AWG
6-10 120 25-50 16 AWG
6-10 120 50-100 14 AWG
6-10 120 100-150 12 AWG
10-12 120 up to 25 16 AWG
10-12 120 25-50 16 AWG
10-12 120 50-100 14 AWG
10-12 120 100-150 12 AWG
12-16 120 up to 25 14 AWG
12-16 120 25-50 12 AWG
12-16 120
GREATER THAN 50 FEET NOT RECOMMENDED
FOREWORD
FUNCTIONAL DESCRIPTION
The Delta Model 32-325 line boring machine comes with a large 16" (406 mm) x 29-3/4" (756 mm) table that provides
a work space for boring large boards.
NOTICE: The manual cover illustrates the current production model. All other illustrations contained in the manual are
representative only and may not depict the actual labeling or accessories included. These are intended to illustrate
technique only.
CARTON CONTENTS
1 - Boring Machine
2 - Fence
3 - Table
4 - Clear Plastic Guard
5 - Operating Handle
6 - Table Brackets
7 - Wrench
8 - Gauge for Aligning Fence to Drill Head
1
2
3
4
5
6
7
8
9
10
13
12
11
14
15
16
17
18
19
9 - Table Bracket Slides (4)
10
- Spacers (2)
11 - 1/4" Flat Washers (2)
12 - 1/4" Lockwashers (2)
13 - 1/4-20 x 1-1/2" (38.1 mm) Hex Screws (2)
14 - Table Lock Knobs (2)
15 - 5/16" Flat Washers (2)
16 - 5/16-18 x 3/4" (19 mm) Carriage Bolts (2)
17 - 1/4-20 Hex Lock Nuts (4)
18 - 1/4-20 x 1-1/4" (31.8 mm) Flat Head Screws (4)
19 - 5/16-24 x 1/4" (6.35 mm) Hex Set Screws (13)