Delta Visione DEV7, Руководство по эксплуатации и обслуживанию

Страница: 9 / 49

DEV7
– Use and Maintenance Manual
Pag. 7
Compliance to safety regulations
The machine was designed and built to function and to be checked and maintained without causing the
operator to be exposed to undue risk, as long as these operations are carried out according to the
operating manual. During the design and construction phases, the mechanical and electrical risks were
eliminated as far as possible together with those resulting from the materials adopted, using the methods
described in detail later on in this document. The measures taken minimize the risks of injury throughout
the machine’s life cycle, within the scope of its intended use and any other reasonably predictable uses .
Note : As the marking head can be integrated with existing devices, its supply does not include any
additional protective measures resulting from the particular nature of the elements to be marked, or the
configuration of the integration line or the workbench.
Personnel training
Thanks to the simplicity of its operation and interface software, the DEV7 marking machine, can be
used by personnel who have not undergone specific training, but who have, however, read and
understood the operating manual.
There must only be one operator responsible for operating the machine.
Stand-alone
The DEV7 marking machine can be used as a stand-alone machine not integrated into a production line
or other devices that extend the compatibility with the essential health and safety requirements of the
2006/42/EC Directive by adding safety repairs.
A T T E N T I O N
When the machine is not integrated into a production line or other devices
compatible with the essential health and safety requirements of the 2006/42/EC
Directive, the operator must be informed and warned about the pinching / crushing
residual risks posed by the punch during the marking process.
A T T E N T I O N
When the machine is not integrated into a production line or other devices
compatible with the essential health and safety requirements of the 2006/42/EC
Directive, the operator should avoid bringing fingers, hands or other objects inside
the marking area during the marking process. In general, it is prescribed to keep
hands away from the machine during the marking process to avoid the risks
mentioned above.
Note: Delta Visione is not responsible for injuries that result from disregard of the above rules of
operation or other general safety rules applicable to the use of this equipment. Furthermore,
disregarding these rules will result in the cancellation of the guarantee.