30
Replacing the batteries
CAUTION:
Observe the following
instructions to avoid mechanical
and electrical damage.
If the battery (5) stops working, replace it as
described in the instructions above.
Remove the batteries (5) that are in the device
before inserting new ones (5).
Inserting the rechargeable
battery
1. Remove the battery cover (1h) from the battery
compartment (1f).
2. Remove the battery (7) from the battery com-
partment (1f).
CAUTION:
Ensure that the connector
(7a) from the rechargeable battery is
firmly connected to the Quadrocopter (1).
3. Close the battery compartment (1f) completely.
Removing the rechargeable
battery (Fig. E)
Open the lid (1h) of the battery compartment (1f)
and insert the battery (7).
Charging the battery
1. Remove the battery (7) from the battery com-
partment (1f) of the Quadrocopter (1) (Fig. E).
WARNING:
Never charge the battery
(7) while it is still mounted in the Quadro-
copter (1). It could catch fire and destroy
the item.
2. Connect the end of the cable (6a) of the USB
charging cable (6) to the battery connector
(7a) of the battery (7) (Fig. F).
3. The battery charge indicator of the USB charg-
ing cable (6) is automatically activated (Fig. F).
4. Plug the other end (6b) of the USB charging
cable (6) into a USB port on a powered-on
computer or charging station with a USB port
(Fig. F).
5. The battery charge indicator of the USB charg-
ing cable (6) lights up, as soon as the recharge-
able battery is fully charged.
NOTE:
Charging takes about 50-80 min-
utes.
6. After charging, disconnect the battery connec-
tor (7a) from the end (6a) of the USB charging
cable (6) and unplug the end (6b) of the USB
charging cable (6) from the USB port.
7. Insert the rechargeable battery (7) into the
battery slot (1f) correctly (see “Inserting the
rechargeable battery”).
Under-voltage warning
The lights (1g) start flashing quickly when the re-
chargeable battery (7) is almost empty. Land the
Quadrocopter (1) as soon as you notice this.
Suitable areas for flying the
Quadrocopter
For ideal flight conditions, the following criteria
should be met:
• Calm wind conditions, up to force 3 winds.
• Check local weather report for current weather
conditions and forecast changes.
• People must remain a safe distance (5m) from
the Quadrocopter when it is taking off.
• Be aware of obstacles before flying, and move
them out of the way if possible, or maintain a
safe distance from them (> 5m).
• Observe your surroundings and look out for
unpredictable elements such as pedestrians,
cyclists and traffic/vehicles.
• Find a large, wide, open area without ob-
structions; watch out especially for buildings,
crowds, power lines and trees.
• For aerobatic activities, such as loops, there
should be a space of approx. 10m in all direc-
tions.
• Take care to select a dry and rain free envi-
ronment. Do not fly the Quadrocopter in poor
or damp weather conditions (e.g. in snow, fog
or at night). The Quadrocopter must only be
operated when visibility is good.
• The Quadrocopter may only be operated in
temperatures between 10°C and 45°C.
• Pay attention to the restrictions in the Drone
Ordinance in respect of prohibited areas (see
the section on “Safety information”).
GB/IE
Содержание DL-5650
Страница 5: ...7 ...
