Delta OHM HD33[L]M.GSM, Руководство по эксплуатации

Страница: 10 / 22

HD33[L]M.GSM
- 10 -
V1.10
excessive discharge there is an option that disables the data logger GSM features when the
power supply drops below 11.8 V (measurement and data logging continues instead regularly).
The option can be set via the HD35AP-S software and is activated by default if the data logger
is supplied with the HD32WSF.S12 power supply unit.
8 USB CONNECTION
The data logger can be connected to a PC through the mini-USB connector located at the
bottom of the housing. Remove the connector protective cap and connect the
CP23 cable.
USB connection doesn’t require the installation of drivers: when the data logger is connected to
a PC, Windows® operating system automatically recognizes the instrument as an HID device
(Human Interface Device) and uses the drivers already included in the operating system.
The data logger must be powered separately, it is not powered by the PC USB port.
When the data logger is not connected to the PC, replace the mini-USB connector protective cap
to ensure the watertight integrity of the instrument.
9 HD35AP-S SOFTWARE
The HD35AP-S software allows:
• Configuring the data logger: measurements to be displayed, alarm thresholds and hystereses,
logging and transmitting intervals, date and time, etc. (see chapters “data loggers
configuration”, “Alarms configuration”, “GSM Options” and “Clock setting” of the software
online help).
• Transferring stored data to PC (see chapters “Data download” and “Data download from
FTP” of the software online help).
• Displaying measurements in real time, also in graphic format (see chapter “Monitor” of the
software online help).
• Managing the graphical representation, print and export of acquired data (see chapter
“Displaying data in the database” of the software online help).
• Calibrating the sensors (see chapter “Calibration” of the software online help).
For the connection of the data logger to the HD35AP-S software see chapter “Connection” of the
software online help.