Delta OHM HD2102.1, Руководство пользователя

Страница: 6 / 36

INTRODUCTION
The
HD2102.1 and HD2102.2 are portable instruments with a large LCD display.
They measure illumination , luminance, PAR and irradiance (across VIS-NIR,
UVA, UVB and UVC spectral regions or in the measurement of effective irradiance
according to the UV action curve).
The probes are fitted with the SICRAM automatic detection module: in addition to
detection, the unit of measurement selection is also automatic. The factory calibration
settings are already memorized inside the instruments.
In addition to instantaneous measurement the instruments calculate the acquired
measurements time integral Q(t). Some thresholds can be associated with the
integrated measurement and with the integration time, which can be set in the menu.
When exceeded these thresholds cause the instrument to stop the integral calculation.
The HD2102.2 instrument is a
datalogger . It memorizes up to 38,000 samples which
can be transferred from the instrument connected to a PC via the multi-standard
RS232C serial port and USB 2.0. The storing interval, printing, and baud rate can be
configured using the menu.
The HD2102.1 and HD2102.2 models are fitted with an RS232C serial port and can
transfer the acquired measurements in real time to a PC or to a portable printer.
The
Max , Min and Avg function calculate the maximum, minimum or average values.
Other functions include: the relative measurement REL, the HOLD function, and the
automatic turning off that can also be disabled.
The instruments have IP67 protection degree.
This manual describes the HD2102.1 and HD2102.2 models: if not otherwise
specified, the description is intended to be applicable to both models.
- - 6