Delta OHM HD2102.1, Руководство пользователя

Страница: 16 / 36

The following table reports the indications provided by the instrument as they appear on the display,
together with their description.
Display indications Explanation
>>>_LOG_DUMP_or_ERAS transfer or erase data
BATT TOO LOW - CHNG NOW battery discharged - replace it immediately
BAUDRATE >>> baud rate value
COMM STOP printing complete
COMM STRT printing started
DAY_ day
DUMP_END data transfer complete
DUMP_In_PROG >>> data transfer in progress
ERR error
FUNC CLR max, min and average values clearing
FUNC CLRD max, min and average values cleared
HOUR hour
INTG LIMT fcdS >>>> integration limit in fcd
INTG LIMT J/m2 >>>> integration limit in J/m2
INTG LIMT luxS >>>> integration limit in lux
INTG LIMT uJ/cm2 >>>> integration limit in (J/cm2
INTG LIMT umolm2 >>>> integration limit in (mol/m2
LOG In PROG logging in progress
LOG MEM FULL memory full
LOG_CLRD memory data cleared
LOG_STOP logging complete
LOG_STRT logging started
MIN >>> USE_UNIT_TO_ZERO SEC minutes >>> use the UNIT key to reset the seconds
MNTH month
NEW_PROB_DET new probe detected
NO_PRBE_ SER_NUM the connected probe's serial number is absent
OVER maximum limit exceeded
PLS_EXIT >>> FUNC RES_FOR_FACT
ONLY please exit using ESC >>> function reserved to factory calibration
PRNT AND LOG INTV printing and logging intervals
PRNT INTV >>> printing interval
PROB COMM LOST lost communication with probe
PROB ERR error - unexpected probe
PRBE_SER #### #### serial number #### #### of the connected probe
SLP_MODE_LOG turning off during recording mode
SYS ERR # program error number #
TIME LIMT HOUR integration time limit in hours
TIME LIMT MIN integration time limit in minutes
TIME LIMT SEC integration time limit in seconds
YEAR year
- - 16