Delta OHM HD2102.1, Руководство пользователя

Страница: 20 / 36

Command Response Description
K5 & Stop logging data
K7 & Enable REL function
K6 & Disable REL function
KP & Auto-power-off function=ENABLE
KQ & Auto-power-off function=DISABLE
RA Sample Interval= # Reading of LOG/PRINT interval set
RP & 720 Battery level (Resolut. 0.01V)
RUA U= W/m2 Main unit of measurement
WA# &
Setting LOG/PRINT interval.
# is a hexadecimal number 0…D that represents the position of the
interval in the list 0, 1, 5, 10, …, 3600 seconds.
WC0 & Setting SELF off
WC1 & Setting SELF on
Command characters are exclusively upper case characters. Once a correct command is entered, the
instrument responds with “&”; when any wrong combination of characters is entered, the
instrument responds with “?”. The instrument response strings end with the sending of the CR
command (Carriage Return). The instrument does not send the LF command (Line Feed).
Before sending commands to the instrument via the serial port, locking the keyboard to avoid
functioning conflicts is recommended: use the P0 command. When complete, restore the keyboard
with the P1 command.
- - 20