HD2013.3
- 21 -
V1.7
7
MAINTENANCE
In principle, the precipitation detector is maintenance-free thanks to an adaptive self-
correction algorithm. However, it is advisable to carry out a periodical (at least every
two years) visual inspection to check for any soiling of the sensitive surface.
If necessary, clean the sensor surface with moistened soft cloth. For more resistant
dirt, a
non-aggressive detergent or ethyl alcohol can be used
.
8
SAFETY INSTRUCTIONS
General safety instructions
The instrument has been manufactured and tested in accordance with the safety
standard EN61010-1:2010 “Safety requirements for electrical equipment for meas-
urement, control and laboratory use” and has left the factory in perfect safety tech-
nical conditions.
The instrument proper operation and operating safety can be ensured only if all
standard safety measures as well as the specific measures described in this manual
are followed.
The instrument proper operation and operating safety can be ensured only in the cli-
matic conditions specified in this manual.
Do not use the instruments in places where there are:
•
Corrosive or flammable gases.
•
Direct vibrations or shocks to the instrument.
•
High-intensity electromagnetic fields, static electricity.
User obligations
The instrument operator shall follow the directives and regulations below that refer to
the treatment of dangerous materials:
•
EEC directives on workplace safety.
•
National law regulations on workplace safety.
•
Accident prevention regulations.
