background image

EN

3

2

Technical characteristics

• Power supplied by 3V lithium battery, CR2430
• Class III insulation
• X3D Transmission frequency:
868.7 MHz to 869.2 MHz
• Maximum radio power < 10 mW
• Receiver category II
• Wireless range: 100 to 300 metres outside, 

variable depending on the associated equipment 
(the range can vary depending on the installation 
conditions and the electromagnetic environment)

• Wall-mounted
• Dimensions: 46 x 121 x 10.7 mm
• Degree of protection: IP 40
• Operating temperature: 0 to +55°C
• Storage temperature: -10 to +70°C
• Installation in an environment with normal 

pollution levels

Contents

1/ Location/Mounting ............................................. 4

1.1  Mounted on the wall ...................................... 4

1.2  Placed on a flat surface

 ................................. 5

2/  Wireless association ........................................... 6

2.1  Pairing of a motor in 
 individual control mode ........................................ 6
2.2  Pairing of a Tyxia receiver for a roller 
shutter motor (e.g. Tyxia 5630 or 5730) .......... 8
2.3  Pairing of several motors  
or receivers in group control ................................ 9

3/  Save the favourite positions ...........................10

4/ Use ..........................................................................11

5/ Troubleshooting .................................................13

Содержание TYXIA 1701









Отзывы: