DELTA DORE TYXIA 1701, Руководство пользователя

Страница: 5 / 8

EN
9 8
2/ Wireless association
2.3 Pairing of several motors
or receivers in group control
Important: if you pair several motors with the
remote control, you will no longer have access to
the stop settings from this remote control.
❶
Set the motors to pending pairing (press the 1 2
button on their individual control for 3 seconds,
or via the Tydom app).
and/or
Set the receivers to pairing mode (press their
button for 3 seconds, or via the Tydom app).
❷
On the remote control, press 1 2 and 1 2 at the
same time and hold for 3 seconds, until the LED
flashes. Release the buttons.
The remote control searches for the various motors
or receivers.
The LED flashes red, then briefly green as soon as a
new receiver is found.
❸ Once the LED on the remote controle slowly
flashes red, press the 1 2 and 1 2 buttons at
the same time for 3 seconds, until the shutters
activate briefly, then release the buttons.
2.2 Pairing of a Tyxia receiver for a roller shutter
motor (e.g. Tyxia 5630 or 5730)
❶ Switch on and set the receiver to pairing mode
by pressing its button for 3 seconds until its LED
flashes red, then release.
❷
On the remote control, press 1 2 and 1 2 at the
same time and hold for 3 seconds until the red
LED flashes, then release the buttons.
When the receiver is detected, the LED briefly lights
up green and the receiver stops flashing.
The shutter activates briefly to confirm the pairing.
The remote control automatically exits pairing mode.