Delsys TRIGNO, Руководство пользователя

Страница: 7 / 18

7 Trigno
TM
EMG System
FCC ID: W4P-SP-W03 (Trigno Body Worn Receiver)
FCC ID: W4P-SP-W01 (Trigno Sensor)
FCC ID: W4P-SP-W05 (Trigno Sensor)
IC: 8138A-DST02 (Trigno Personal Monitor System)
This device complies with Part 15 of the FCC Rules and Indus-
try Canada’s RSS-210 License Exempt Standards. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause un-
desired operation.
This product complies with FCC OET Bulletin 65 radiation ex-
posure limits set forth for an uncontrolled environment.
Pursuant to Part 15.21 of the FCC Rules, any changes or modi-
fications to this product not expressly approved by Delsys Inc.
might cause harmful interference and void the FCC authorization
to operate this product.
To reduce potential radio interference to other users, the antenna
type and its gain should be so chosen that the equivalent isotropi-
cally radiated power (EIRP) is not more than that required for
successful communication.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. There
is no guarantee that interference,will not occur in a particular in-
stallation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into outlet on a separate circuit.