background image

5

Trigno

TM

 EMG System

Warnings and Precautions

Consult all accompanying documents for precautionary state-

ments and other important information.

Consult accompanying user’s guide for detailed instructions. 

Keep the device dry.  The device is not waterproof and should not 

be submerged under any circumstance.  The ingress of liquids may 

compromise the safety features of the device. The device is not 

intended for use under high sweat conditions.  Situations which 

may result in the entrapment of sweat around the sensors must be 

avoided.

Handle with care. Trigno sensors and instruments are precision 

devices and not designed for excessively rugged use. Carefully in-

spect  devices prior to each use to ensure that no mechanical dete-

rioration has occurred. 

Sensitive electronic device. Avoid static discharges. Do not oper-

ate or store near strong electrostatic, electromagnetic, magnetic or 

radioactive fields. Interference from external sources may decrease 

the signal-to-noise ratio or result in corrupted data.

Connect only to Delsys-approved devices.

Connecting a patient to high-frequency surgical equipment while 

using Delsys EMG systems may result in burns at the site of the 

EMG sensor contacts.

Immediately discontinue device use if skin irritation or discomfort 

occurs.

Immediately discontinue device use if a change in the device’s 

performance is noted. Contact Delsys technical support for as-

sistance.

Delsys Inc. guarantees the safety, reliability, and performance of 

the equipment only if assembly, modifications and repairs are 

carried out by authorized technicians; the electrical installation 

complies with the appropriate requirements; and the equipment 

is used in accordance with the instructions for use.

Содержание TRIGNO



















Отзывы: