Trigno
TM
Personal Monitor User’s Guide
15
Basic Operations
Charging the Trigno Sensors
Connect the Trigno power supply to the circular DC jack located
on the side of the Recharge Station. Energize the power supply by
connecting it to a Mains outlet. Be sure to use the appropriate plug
adapter for your location. Ensure that the Trigno sensors are properly
fitted in the recharge pockets. The sensor LEDs will illuminate to am-
ber during charging and green when charge is complete. The recharge
unit will periodically check sensors and apply a top-off charge to en-
sure that the battery kept at full capacity during extended periods of
storage, as long as power is connected.
Figure 6:
Connecting the SC-P05 power supply to the Sensor
Charge Station.
