Delphin Expert Logger, Руководство пользователя

Страница: 130 / 282

Expert Logger
The trigger ( blue curve) starts the pulse generator ( red curve) with
a rising edge. Then comes the reset ( purple curve). Because the
high level ("high") remains, no further pulses are generated ( Reset =
High level ). Meanwhile, the trigger channel switches to a low level
("Low"). However, because the reset channel remains at a high level
as before, the trigger channel's edge has no effect. The pulse gen-
erator does not re-start even when the reset channel reverts to a low
level as it is only re-started with an edge in the trigger channel. The
pulse generator restarts only once the trigger channel has a (rising)
edge.
c)
Trigger and reset are triggered by channels and are set to Level high .
The pulse generator ( red curve) is started by the trigger channel
( blue curve). When a reset signal ( purple curve) is received, the out-
put is set to "low" and no further pulses are generated. When the
reset signal resets to "Low", the pulse generator re-starts (10:25:25)
because the trigger channel remains at a high level. In the second
example, no further pulses are generated because the trigger chan-
nel has meanwhile gone to "low".
d)
The trigger is triggered by a channel and has been set to High level .
The reset is also triggered by a channel, but has been set to Edges
(both) .
130
Delphin Technology AG
Januar 2018
Expert Logger Manual