DèLonghi Esam6900, Инструкция по эксплуатации

Страница: 13 / 29

12
Descale
For instructions on descaling, see page 20.
Install water filter (some models only)
For instructions on the water filter, see page 21.
Set time
To adjust the time on the display, proceed as follows:
Press the OK icon to select the function. Set the
hour using the symbol to increase and the
symbol to decrease, then press OK again to
confirm, then adjust the minutes. Finally press
OK
to memorise the time set.
Please note!
Hold the or symbol down to run through the hours and
minutes quickly.
Auto-start
You can set the auto-start time in order to have the appliance
ready at a certain time (for example in the morning) so you can
make coffee immediately.
Please note!
• For the appliance to come on at the set time,
the time
must be set correctly.
• To set the auto-start time, the hour must first have been
set.
Press the OK icon to select the function, then
press
OK
again to enable.
Adjust the time as described in the previous sec-
tion and confirm with
OK
. The grey symbol indi-
cates that the function is not active.
Please note!
• When the function is active, the symbol appears
alongside the current time.
• To disable the function, access the menu and select the
function as described above. “DISABLE?” is displayed. Press
OK to confirm. The symbol alongside the current time
disappears.
• When the main switch is turned off, the “Auto-Start” setting
is reset.
Auto-Off (Standby)
The auto-off time can be changed so that the appliance switch-
es off after 15 or 30 minutes, or after 1, 2 or 3 hours.
Press the OK icon to select the function. Press the
or icon to select the required time, then
press OK again to confirm.
Energy Saving
Use this function to enable or disable Energy Saving.
When enabled, the function reduces energy consumption in
compliance with European regulations.
Press the OK icon to select the function, then
press
OK
again to enable or disable Energy
Saving.
Please note!
• When the function is active, the symbol appears
alongside the current time.
• A few seconds may elapse between Energy Saving and de-
livery of the first drink.
• When Energy Saving is disabled, the appliance turns the
cup warmer on automatically.
Coffee temperature
To modify the temperature of the water used to make the coffee,
proceed as follows:
Press the
OK
icon to select the function. Press the
or icon to select the required temperature,
then press
OK
again to confirm.
Please note!
This menu item can be customised in all profiles (see
“Memorising your personal profile” on page 18).
Setting water hardness
For instructions on setting water hardness, see
page 21.
Beep
This enables or disables the beep emitted by the machine each
time an icon is pressed or an accessory is inserted/removed. The
beep is active by default.
Press the
OK
icon to select the function. Press OK
again to enable or disable the beep. The grey sym-
bol indicates that the function is not active.
Default values (reset)
This resets all menu settings and programmed quantities back
to the default values (with the exception of the language which
remains as set).