DèLonghi Esam6900, Инструкция по эксплуатации

Страница: 27 / 29

26
The coffee does not come out
of the spouts, but from around
the service door. The holes in the spouts are clogged with dry
coffee dust. Clean the spouts with a toothpick, sponge or
hard bristled kitchen brush.
The coffee guide inside the service door is blo-
cked and cannot swing. Thoroughly clean the coffee guide, particularly
near the hinges.
The coffee is delivered too
quickly. The coffee is ground too coarsely. Turn the grinding adjustment dial one click
counter clockwise towards “1” while the coffee
mill is in operation (fig. 11). Avoid turning the
grinding adjustment dial excessively other-
wise when you select two cups, the coffee may
be delivered a drop at a time.
Coffee does not come out of
one of the spouts. The spouts are blocked. Clean the spouts with a toothpick .
Water comes out of the spouts
instead of coffee. The pre-ground coffee may be blocked in the
funnel (A8) Empty the funnel with the help of the brush
as described in the section “Cleaning the pre-
ground coffee funnel”.
The milk
does not
come out
of the milk
spout. The milk container lid is dirty. Clean the milk container lid as described in the
section “Cleaning the milk container”.
The milk
contains
large
bubbles and
squirts out
of the milk
spout or
there is little
froth. The milk is not cold enough or is not
semi-skimmed. Use skimmed or semi-skimmed milk at refrige-
rator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial is incorrectly
adjusted. Adjust following the instructions in the section
“Making drinks with milk”.
The milk container lid or froth adjustment dial
are dirty Clean the milk container lid and dial as de-
scribed in the section “Cleaning the milk
container”.
The hot water/steam nozzle is dirty Clean the nozzle as described in the section
“Cleaning the hot water/steam nozzle”.
The milk
contains
large
bubbles and
there is little
froth The spout is dirty. Clean as described in the section “Cleaning the
spout after use”.
The milk is not cold enough or is not
semi-skimmed. You should ideally use skimmed or semi-skim-
med milk at refrigerator temperature (about
5°C). If the result is not as you wished, try
changing brand of milk.
The steam nozzle has not been inserted after
cleaning. Replace all the spout components correctly.
The appliance does not come
on It is not plugged into the mains socket. Plug into the mains socket.
The main switch is not turned on. Place the main switch in the I position
The button has not been pressed
sufficiently.
Hold the button down for a few seconds.