5
A
Filter cap fastening hook
B
Anti-odour filter cap
C
Lid
D
Inspection window (if provided)
E
Filter inspection opening
F
Basket
G
Handle slider
H
Basket handle
I
Lid opening button
L
Handle for lifting appliance
M
Minute timer (if supplied)
N
Minute timer key (if supplied)
O
Pilot lamp
P
Drainage tube panel (if provided)
Q
Drainage tube “easy clean system”
(if provided)
R
Cord holder (if provided)
DESCRIPTION OF THE APPLIANCE
(pag. 2)
WARNING
SERIOUS HOT-OIL BURNS MAY RESULT
FROM A DEEP FRYER BEING PULLED OFF A
COUNTERTOP. DO NOT ALLOW THE
CORD TO HANG OVER THE EDGE OF THE
COUNTER WHERE IT MAY BE GRABBED BY
CHILDREN OR BECOME ENTANGLED WITH
THE USER. DO NOT USE EXTENSION
CORD.
DO NOT DRAPE
CORD!
KEEP FROM
CHILDREN!
IF YOUR DEEP FRYER IS SUPPLIED WITH A CORD SET WITH MAGNETIC CONNECTOR:
First fit the magnetic connector to the appliance, as
seen in Figure 13, making sure that the protruding part
of the connector (
X
) is correctly inserted in the corre-
sponding slot on the appliance, and then plug the
cable into the power outlet.
Warning
Never leave the appliance plugged into the power
outlet if the magnetic connector is not fitted to the deep
fryer, Figure 14.
If the magnetic connector does not remain in place,
check that it has been inserted correctly, see Figure 13.
If the problem persists, contact an authorised service
centre.
When the appliance is powered, always leave some
free space around the magnetic connector, so as to
prevent it from becoming detached.
Only use a type TA-35PA cord set supplied by De’lon-
ghi authorised service centres.
X
fig.13
fig.14
GB/F/E 18-02-2003 15:55 Pagina 5
