19
LIGHts
DescRIPtIon
MeAnInG
WHAt to Do
1
2
3
4
5
6
7
8
9
10
11
The lights flash
alternately
The coffee maker has just
been turned on, the infu-
ser is not inserted correct-
ly and the service door is
not correctly closed.
Press the word PUSH on the infu-
ser until it clicks into place.
Make sure the two red buttons
have snapped out.
Close the service door and turn the
appliance on again
1
2
3
4
5
6
7
8
9
10
11
The lights flash
The pre-ground coffee
funnel is clogged
Empty the funnel with the help of a
brush as described in the section
“Cleaning the pre-ground coffee
funnel”.
1
2
3
4
5
6
7
8
9
10
11
The light is on
steadily
The infuser has not been
replaced after cleaning.
Insert the infuser as described in
the paragraph “Cleaning the infu-
ser”
The inside of the appliance
is very dirty
Clean the appliance thoroughly
1
2
3
4
5
6
7
8
9
10
11
The light flashes
The service door is open
If you cannot close the door, make
sure the infuser is correctly inser-
ted
1
2
3
4
5
6
7
8
9
10
11
The lights flash
alternately
The coffee maker has
been switched on with the
steam knob in the open
position
Turn the steam knob clockwise un-
til delivery stops
tRoUBLesHootInG
Below is a list of some of the possible malfunctions.
If the problem cannot be resolved as described, contact Customer Services.
PRoBLeM
PossIBLe cAUse
soLUtIon
The coffee is not hot
•
The cups were not preheated.
•
Warm the cups by rinsing them with hot
water (N.B. you can use the hot water
function).
•
The infuser has cooled down because
2/3 minutes have elapsed since the last
coffee was made.
•
Before making coffee, heat the infuser by
pressing the
button.
The coffee is weak or
not creamy enough.
•
The coffee is ground too coarsely.
•
Turn the grinding adjustment knob one
click anticlockwise towards “1” while
the coffee mill is in operation (fig. 7).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering 2 coffees (see the
section: “Adjusting the coffee mill” on
page 11).
•
The coffee is unsuitable.
•
Use pre-ground coffee for espresso
coffee makers
The coffee is delivered
too slowly or a drop at
a time.
•
The coffee is ground too finely.
•
Turn the grinding adjustment knob
one click clockwise towards “7” while
the coffee mill is in operation (fig. 7).
Continue one click at a time until coffee
delivery is satisfactory. The effect is only
visible after delivering 2 coffees (see the
section: “Adjusting the coffee mill” on
page 11).
