11
clockwise, otherwise the coffee may be de-
livered too slowly (a drop at a time), particu-
larly when making two cups of coffee.
selecting the quantity of coffee in the cup
Adjust the coffee quantity selection knob (B9) to
set the required quantity.
Turning it clockwise increases the amount of cof-
fee obtained.
Please note :
The first time you use the appliance, you will
need to make a number of coffees to identify the
correct knob position through trial and error.
Adjusting the coffee mill
The coffee mill is set by default to prepare cof-
fee correctly and should not require regulating
initially.
However, if after making the first few coffees you
find that the coffee is either too weak and not
creamy enough or delivery is too slow (a drop
at a time), this can be corrected by adjusting the
grinding adjustment knob (fig. 7).
Please note :
The grinding adjustment knob must only be tur-
ned when the coffee mill is in operation..
To obtain delivery not a drop
at a time, turn one click
clockwise towards “7”.
For fuller bodied creamier
coffee, turn one click anti-
clockwise towards “1” (do
not turn more than one click
at a time otherwise the cof-
fee could be delivered a drop
at a time).
These adjustments will only be evident after at
least 2 cups of coffee have been made.
If this adjustment does not obtain the desired
result, turn the knob another click.
tips for a hotter coffee:
For hotter coffee, you should:
• before delivering the coffee, perform a rinse
cycle by pressing the
button. Hot water
is delivered from the spout, heating the inter-
nal circuits of the appliance and thus raising
the coffee temperature.
• warm the cups by rinsing them with hot wa
-
ter (using the hot water function).
Making coffee using coffee beans
Important!
Do not use caramelised or candied coffee beans
as they could stick to the coffee mill and make it
unusable.
1. Fill the container with coffee beans (fig. 8).
2. Place under the coffee spouts:
- 1 cup, if you want 1 coffee (fig. 9);
- 2 cups, if you want 2 coffees.
3. Lower the spouts as near as possible to the
cup. This makes a creamier coffee (fig. 10).
4. Press the button corresponding to the num-
ber of coffees required (1 cup
or 2 cups
, figs. 11 and 12).
5. Preparation begins and the
or
light stays on until delivery is complete.
Please note:
• While the machine is making coffee, delivery
can be interrupted at any moment by pres-
sing one of the two coffee buttons (
or
).
• At the end of delivery, to increase the quantity
of coffee in the cup, just press (within 3 secon-
ds) one of the coffee buttons (
or
).
Once the coffee has been made, the appliance is
ready to use again.
Please note:
For hotter coffee, see the section “tips for a hot-
ter coffee” (page 11).
Important!
• If the coffee is delivered a drop at a time, too
weak and not creamy enough or too cold,
read the tips in the “Troubleshooting” sec-
tion on page 19.
• Lights may be displayed on the control pa
-
nel during use. Their meaning is given in the
