24
PROBLEM
POSSIBLE CAUSE
REMEDY
At the end of descaling, the
appliance requests a third
rinse
During the two rinse cycles, the water tank has
not been filled to the MAX level.
Follow the instructions displayed by the appli-
ance, but first empty the drip tray to avoid the
water overflowing.
The milk does not come out of
the milk spout (D5)
The lid (D2) of the milk container lid is dirty
Clean the milk container lid as described in the
section “14.10 Cleaning the milk container”.
The milk contains large
bubbles and squirts out of
the milk spout (D5) or there is
little froth
The milk is not cold enough or is not
semi-skimmed.
Use skimmed or semi-skimmed milk at refrig-
erator temperature (about 5° C). If the result is
not as you wished, try changing brand of milk.
The froth adjustment dial (D1) is incorrectly
adjusted.
Adjust following the instructions in section
“11.2 Adjusting the amount of froth”.
The milk container lid (D2) or froth adjustment
dial (D1) is dirty
Clean the milk container lid and dial as de-
scribed in section “11.4 Cleaning the milk con-
tainer after use” and “14.10 Cleaning the milk
container”
The hot water connection nozzle (A8) is dirty
Clean the connection nozzle as described in
section . “14.11 Cleaning the hot water nozzle”.
