ADVICE FOR USE AND MAINTENANCE OF CATALYTIC PANELS
(main oven only)
The catalytic panels are covered with special microporous enamel which absorbs
and does away with oil and fat splashes during normal baking over 200°C.
If, after cooking very fatty foods, the panels remain dirty, operate the oven “idling”
on max temperature for about 30 minutes.
These panels do not need to be cleaned, however it is ad vised to periodically
remove them from the oven (at least the side panels) and to wash them with tepid
soapy water and then wipe off with a soft cloth.
Do not wash or clean with abrasive products or with products containing
acids or alkalis.
The side panels are reversible and when the catalytic microporous enamel
degrades, they can be turned to the other side.
GREASE FILTER (main oven only)
A special screen is provided at the back of the oven to catch grease particles,
mainly when meat is being roasted (fig. 18).
When baking pastry etc. this filter should be removed.
Always clean the filter after cooking as any solid residues on it might adversely
affect the oven performance.
The grease filter can be removed for cleaning and should be washed regularly in
hot soapy water. Always dry the filter properly before fitting it back into the oven.
23
Figure 18
