ELECTRONIC CLOCK
The illuminated figures on the clock represent hours and minutes on a 24 hour
clock. When first connected, or after a power failure, three zeros will flash on the
display. To set the time press the button and then the or . Please
note that changing the hour button deletes any cooking program.
N O R M A L C O O K I N G W I T H O U T T H E U S E O F T H E
PROGRAMMER
To manually use the oven, that is, without the aid of the programmer, it is neces-
sary to cancel the flashing AUTO by pushing the button (AUTO will be swit-
ched off and symbol will go on).
Attention: If the AUTO is not flashing (which means a cooking program has
already been inserted), by pushing the button you have cancelled the
program and switched to manual.
ELECTRONIC TIMER
The timer program consists only of a buzzer which may be set for a maximun
period of 23 hours and 59 minutes.
If the AUTO is flashing push the button.
To set the timer, push the button and the or until you obtain the
desired time.
Having finished the setting, the normal time will appear on the panel and the
symbol will appear.
The countdown will start immediately and may be checked at any time by
pressing the button .
At the end of the time, the symbol will be switched off and an intermittent
buzzer will sound: this can be stopped by pressing any one of the buttons.
SETTING THE FREQUENCY OF THE AUDIBLE SIGNAL
By pressing the button you can choose from three variations.
19
Figure 12
Figure 13
