DeLonghi DEF905GEG, Руководство пользователя, Страница: 47 / 52

47
AFTER CLEANING, REPLACE THE
INNER GLASS PANE
When replacing the inner glass pane, make
sure that:
■
You replace the pane correctly, as
shown. The pane must be in the
position described below in order to
fit into the door and to ensure that the
oven operates safely and correctly.
To reassemble the inner pane of the oven
door operate as follows:
1. Make sure the door is locked open
(see fig. 49c).
2.
Replace the inner pane:
■
Check that the four rubber pads are in
place (“
D
” in fig. 52a).
IMPORTANT: It is advisable, while
refitting the glass, to keep pressed in
position the four rubber pads “ D ”, by a
finger, to avoid breakage or slippage of
the rubber pads themselves (fig. 52b).
■
Check that you are holding the pane
the correct way. The shiny side shall
face the inside of the oven.
■
Insert the pane in the left “ E ” and right
“ F
” slide guides (fig. 52b), and gently
slide it to the retainers “ H ”
(fig. 52c).
■ Gently push the air deflector “
G ” back
into place (fig. 52d).
■
Unlock the oven door by opening it
completely and closing the lever “
A ”
on the left and right hinges (fig. 52e).
H
D
A
G
F
E
Figure 52a
Figure 52b
Figure 52c
Figure 52d
Figure 52e