GB
18
DISPLAY
Fan Heater
Clock
Chrono temperature Set
Chrono program time bar
Days of the Week
Keypad Lock
Chrono presets
Overdrive (2h)
Children Safety
Signal broadcast
Temperature set point/Fan heater timer
Operating modes
4.3 ON/STANDBY MODE
In “Standby” mode the current time and the
day of the week appear on the display.
All the operating modes are suspended (“Pilot
Wire“ included), but the appliance is powered
and waiting for command reception.
To turn the appliance on or off, press the “Stand-
by” key.
The radiator turns on in the previously selected
operating mode and emits a sound.
:KHQ©½UVW©XVLQJ©WKH©UHPRWH©DIWHU©UHSODFLQJ©WKH©
batteries, the “Comfort” mode is selected.
The entry into “Standby“ mode is signalled by
means of a double beep, the exit from “Standby“
mode by means of a long beep.
TURNING ON FOR THE FIRST TIME
After inserting the batteries, set the day of the week and
time.
Adjust the day of the week by using the “+“ and “-“
NH\V© 021© 78(¨ 681©WKHQ©FRQ½UP©E\©
pressing the “Mode“ selection key.
7KH©KRXU©VWDUWV©¾DVKLQJ©,Q©WKH©VDPH©ZD\©DG
-
just the hour by using the “+“ and “-“ keys and
FRQ½UP©ZLWK©±0RGH±©VHOHFWLRQ©NH\©
Repeat the same procedure for the minutes.
4.4 OPERATING MODES
The appliance provides 5 operating modes
which allow the user to heat the environment in
the most suitable way with respect to his needs.
Press the “Mode“ selection key to select the
desired operating mode. An icon on the LCD
will show the selected operating mode.
Pilot Wire
Comfort
Night/Eco
Anti-Freeze
Chrono
PILOT WIRE
The temperature depends on the “Pilot Wire“ command.
All “Pilot Wire“ commands are enabled.
COMFORT
The “Comfort“ temperature corresponds to the tem-
perature desired by the user.
All “Pilot Wire“ commands are disabled.
NIGHT/ECO
The “Night/Eco“ mode keeps a comfortable tem-
perature with a reduced energy consumption.
All “Pilot Wire“ commands are disabled.
ANTIFREEZE
In “Anti-Freeze“ mode, the temperature set point is
½[HG©DW©©&
The appliance starts heating automatically when
the room temperature drops below 7 °C.
All “Pilot Wire“ commands are disabled.