GB
16
4. REGULATION AND OPERATION
The appliance is designed to heat
rooms.
Some parts of this product can be-
come very hot and cause burns.
Particular attention has to be given
where children and vulnerable peo-
ple are present.
.HHS© FRPEXVWLEOH© RU© ¾DPPDEOH© PD
-
terials or pressure vessels (e.g. spray
FDQV©½UH©H[WLQJXLVKHUV©DW©OHDVW©©FP©
from the appliance. Do not vaporise
any type of substance on the surface of
the appliance.
Never touch the appliance with wet or damp
hands or feet.
Do not wet the electronic control unit with water
RU©RWKHU©¾XLGV©©,I©WKLV©RFFXUV©GLVFRQQHFW©WKH©DS
-
pliance from the mains power supply and allow to
dry completely.
When the appliance is installed at high altitude,
the air will be hotter than the set temperature.
Possible traces of oil noted on the bottom of the
UDGLDWRU© GXULQJ© PRXQWLQJ© RU© WKH© ½UVW© WLPHV© \RX©
turn the appliance on may be left from the fabri-
cation process. Clean the part with proper precau-
tions at intervals of a couple of days. If the problem
reoccurs, follow the instructions in Chapter 7.
In cold conditions, the radiator may emit metallic
sounds when turned on. This is due to the expan-
sion of the materials.
4.2.1 LED AND BUZZER
The control LEDS allow you to immediately recognize the
active mode (Fig. 8).
The Command is equipped with a beeper that signals the
KDSSHQLQJ© RI© VSHFL½F© HYHQWV© ,Q© GHWDLO© WKH© HQWU\© LQWR© DQG©
H[LW©IURP©±6WDQGE\²©PRGH©DUH©VLJQDOOHG©E\©PHDQV©RI©VSHFL½F©
beeps (see Chap. 4.3).
RIGHT LED
Green Standby
Red Pilot
Wire
Blue
Comfort
Yellow
Night/Eco
White
Chrono
Flashing green
Anti-Freeze
Flashing red
Overdrive (2h)
Yellow and red alternating
Malfunctioning
Pulse green
No power supply
Fig. 8
STANDBY key /
Infrared receiver
LEDS
LEFT LED
4.1 OPERATION
The appliance is controlled by an infrared remote control
which allowes access to all functions.
In case the remote control is unavailable (due to batteries
out of charge or malfunctions), the radiator can be turned
on and off using the “Standby” key on the bottom of the ra-
diator. (Fig. 8, Chap. 4.6).
4.2 OPERATION WITH REMOTE CONTROL UNIT
The appliance is controlled by an infrared remote control
with LCD display.
Red
The heating element is on.
Off
The heating element is off.
Blinking red (2
seconds)
Transmission of the signal from the
remote control.
Flashing red
An open window has been detected.