Dell XPS 720 H2C Скачать руководство пользователя страница 47

Страница: 47 / 124

12.

If present, lower the card retention device that lays over the installed cards and snap it into place.

13.

Replace the computer cover (see

Replacing the Computer Cover

), reconnect the computer and devices to electrical outlets, and then turn them on.

Network Adapter and Sound Card Settings

If you installed a sound card:

Enter system setup (see

Entering System Setup

), select

Integrated Audio Controller

, and then change the setting to

Off

Connect external audio devices to the sound card connectors. Do not connect external audio devices to the microphone, speaker/headphone, or line-in
connectors on the back panel.

If you removed a sound card:

Enter system setup (see

Entering System Setup

), select

Integrated Audio Controller

, and then change the setting to

Connect external audio devices to the audio connectors on the back panel of the computer.

If you installed an add-in network adapter and want to disable the integrated network adapter:

Enter system setup (see

Entering System Setup

), select

Integrated NIC Controller,

and then change the setting to

Off

Connect the network cable to the add-in network adapter connectors. Do not connect the network cable to the integrated connector on the back panel.

If you removed an add-in network connector:

Enter system setup (see

Entering System Setup

), select

Integrated NIC Controller

, and then change the setting to

Connect the network cable to the integrated connector on the back panel of the computer.

Drives

Your computer supports:

Six SATA devices (hard drives or optical drives)

Two IDE devices (two hard drives or two optical drives)

One floppy drive

One Media Card Reader

1 graphics card bridge (not present on some

dual graphics card configurations)

2 power

connectors (2)

3 dual-PCI Express

graphics cards

NOTICE:

To connect a network cable, first plug the cable into the network port or device and then plug the cable into the computer.

NOTICE:

When removing and replacing drives, be sure to leave the drive data and power cables connected to the system board.

Содержание XPS 720 H2C





























































































































Результаты поиска

Содержание XPS 720 H2C

Отзывы:

Похожие инструкции для XPS 720 H2C

Бренды по названию

Популярные бренды

Dell XPS 720 H2C, Руководство пользователя

Результаты поиска

Содержание XPS 720 H2C

Отзывы:

Похожие инструкции для XPS 720 H2C

Бренды по названию

Популярные бренды