manualshive.com logo in svg

Dell XPS 720 H2C, Руководство пользователя, Страница: 122 / 124

Поделиться
Скачать
Dell XPS 720 H2C Скачать руководство пользователя страница 122

 

If you do not press <Ctrl><F11> in time, let the computer finish starting, and then restart the computer again. 

 

 

3.

Click 

Restore

 and click 

Confirm

.  

 

The restore process takes approximately 6 to 10 minutes to complete. 

 

 

4.

When prompted, click 

Finish

 to reboot the computer.  

 

 

 

5.

When prompted, click 

Yes

.  

 

The computer restarts. Because the computer is restored to its original operating state, the screens that appear, such as the End User License 
Agreement, are the same ones that appeared the first time the computer was turned on.  

 

 

6.

Click 

Next

.  

 

The 

System Restore

 screen appears and the computer restarts.  

 

 

7.

After the computer restarts, click 

OK

.  

 

Removing PC Restore: 

Dell PC Restore enables you to restore your hard drive to the operating state it was in when you purchased your computer. It is recommended that you 

do not

 

remove PC Restore from your computer, even to gain additional hard-drive space. If you remove PC Restore from the hard drive, you cannot ever recall it, and 
you will never be able to use PC Restore to return your computer operating system to its original state. 

 

 

1.

Log on to the computer as a local administrator.  
 

 

  

2.

In Microsoft Windows Explorer, go to 

c:\dell\utilities\DSR

.  

 

 

  

3.

Double-click the filename 

DSRIRRemv2.exe

.  

 

 

 

4.

Click 

OK

 to remove the PC Restore partition on the hard drive.  

 

 

  

5.

Click 

Yes

 when a confirmation message appears.  

 

The PC Restore partition is deleted and the newly available disk space is added to the free space allocation on the hard drive.  

 

 

6.

Right-click 

Local Disk (C)

 in Windows Explorer, click 

Properties

, and verify that the additional disk space is available as indicated by the increased value 

for 

Free Space

.  

 

 

  

7.

Click 

Finish

 to close the 

PC Restore Removal

 window and restart the computer.  

 

 

 

Windows Vista: Dell Factory Image Restore  

Using Factory Image Restore: 

 

 

1.

Turn on the computer. When the Dell logo appears, press <F8> several times to access the Vista Advanced Boot Options Window.  
 

 

  

2.

Select 

Repair Your Computer

.  

 

The System Recovery Options window appears. 

 

 

3.

Select a keyboard layout and click 

Next

.  

 

 

  

4.

To access the recovery options, log on as a local user. To access the command prompt, type 

administrator

 in the User name field, then click 

OK

.  

 

 

  

 

NOTICE: 

If you do not want to proceed with PC Restore, click 

Reboot

.

 

NOTE: 

Do not manually shut down the computer. Click 

Finish

 and let the computer completely reboot.

 

NOTICE: 

Removing Dell PC Restore from the hard drive permanently deletes the PC Restore utility from your computer. After you have removed Dell PC 

Restore, you will not be able to use it to restore your computer operating system.

 

NOTE: 

If you do not log on as a local administrator, a message appears stating that you that you must log on as administrator. Click 

Quit

, and 

then log on as a local administrator.

 

NOTE: 

If the partition for PC Restore does not exist on your computer hard drive, a message appears stating that the partition was not found. 

Click 

Quit

; there is no partition to delete.

Содержание XPS 720 H2C





























































































































Отзывы:

Нет отзывов