4.
Press the blue tabs on each side of the hard-drive bracket toward each other and slide the drive up and out of the hard-drive bay.
5.
Ensure that all connectors are properly cabled and firmly seated.
6.
Replace the computer cover (see
Replacing the Computer Cover
).
7.
Connect the computer and devices to electrical outlets, and turn them on.
Installing a Hard Drive
1.
Follow the procedures in
Before You Begin
.
2.
Remove the computer cover (see
Removing the Computer Cover
).
3.
Remove the existing hard drive, if applicable (see
Removing a Hard Drive
).
1
power cable
2
data cable
1
blue tabs (2)
2
hard drive
3
hard drive bay
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
