Dell XPS 700 Скачать руководство пользователя страница 54

Страница: 54 / 66

NOTICE:

Dell does not recommend operating the

CPU at a frequency that is greater than the
manufacturer's design specifications (also referred to
as

over-clocking

). Operating the CPU in this manner

may cause your system to shut down unexpectedly,
may result in a loss of data, and may reduce the
operational life of the processor. If the system shuts
down unexpectedly or is unstable, select a lower CPU
operating frequency.

NOTE:

Press <Alt><F> to return the processor back

to the default setting.

HDD Acoustic Mode

(

Bypass

default)

Determines the acoustic mode at which the hard
drive operates.

Bypass

—

Do nothing (needed for older

drives).

Quiet

—

The hard drive operates at its most

quiet setting.

Suggested

—

Allow the hard drive

manufacturer to select the mode.

Performance

—

he hard drive operates at its

maximum speed.

NOTE:

Switching to performance mode may cause an

increase in noise produced by the drive, but does not
affect the drive's performance.

NOTE:

Changing the acoustics setting does not alter

your hard drive image.

Security

Admin Password

(

Not Set

default)

Used to prohibit an unauthorized user from changing
any configuration settings in the system setup.

System Password

(

Not Set

default)

Used to prohibit an unauthorized user from booting
to the operating system.

Password Changes

(

Unlocked

default)

This option locks the system password field with the
administrator (admin) password.

NOTE:

When the system password field is locked,

you can no longer disable password security by
pressing <Ctrl><Enter> when the computer starts.

Execute Disable

(

default)

Enables or disables Execute Disable Memory
Protection technology.

Off

—

Execute Disable Memory Protection

technology is disabled.

—

Execute Disable Memory Protection

technology is enabled.

Power Management

AC Recovery

(

Off

default)

Specifies how the computer will behave when AC
power is restored after an AC power loss.

Off

—

The system stays off after AC power is

restored.

—

The system powers on after AC power is

restored.

Last

—

The system returns to the previous

state after AC power is restored.

Auto Power On

(

Off

default)

Disables or selects when to automatically turn on the
computer.

Off

—

Do not use the

Auto Power Time

Everyday

—

Turn the computer on every day

at the time set in

Auto Power Time

Weekdays

—

Turn the computer on Monday

through Friday at the time set in

Auto Power

Time

Содержание XPS 700



































































Результаты поиска

Содержание XPS 700

Отзывы:

Похожие инструкции для XPS 700

Бренды по названию

Популярные бренды

Dell XPS 700, Руководство по обслуживанию

Результаты поиска

Содержание XPS 700

Отзывы:

Похожие инструкции для XPS 700

Бренды по названию

Популярные бренды