System Setup: Dell XPS 430 Service Manual
setup.htm[4/15/2014 11:28:36 AM]
Power Management
AC Recovery
(
Off
default)
Specifies how the computer will behave
when AC power is restored after an AC
power loss.
Off
— The system stays off after
AC power is restored.
On
— The system powers on after
AC power is restored.
Last
— The system returns to the
previous state after AC power is
restored.
Auto Power On
(
Off
default)
Disables or selects when to automatically
turn on the computer.
Off
— Do not use the
Auto Power
Time
.
Everyday
— Turn the computer on
every day at the time set in
Auto
Power Time
.
Weekdays
— Turn the computer
on Monday through Friday at the
time set in
Auto Power Time
.
NOTE:
This feature does not work if you
turn off your computer using a power
strip or surge protector.
Auto Power Time
Specifies the time to automatically turn on
the computer.
Change the time to automatically turn on
the computer by pressing the up- or
down-arrow key to increase or decrease
the numbers, or type the numbers in the
appropriate time field.
NOTE:
This feature does not work if you
turn off your computer using a power
strip or surge protector.
Remote Wake Up
(
Off
default)
This option allows the computer to power
up when a Network Interface Controller
or Remote Wakeup-capable modem
receives a wake up signal.
Off
— Remote wake up is disabled.
On
— Remote wake up is enabled.
On w/Boot to NIC
— The
computer attempts to boot from a
network prior to using the boot
sequence.
Suspend Mode
(
S3
default)
Specifies the power management suspend
mode.
S1
— The computer resumes more
quickly from sleep mode.
S3
— The computer conserves
more power when not in use
(system memory remains active).
