Dell Vostro 15-7580, Руководство пользователя

Страница: 33 / 105

6 To remove the system board:
a Remove the three (M2.5x5) screws that secure the system board to the system [1].
b Carefully lift the left side of the system board and remove the system board from the system [2].
BEMÆRK: For complete replacement of the system board the heatsink needs to be removed.
Installing the system board
1 Align the system board into its original position on the system.
2 Replace the three (M2.5x5) screws to secure the system board to the system.
3 Replace the four (M2x3) screws that secure the system fan to the system board.
4 Connect the speaker cable to the system board.
5 Place the Type-C USB metal bracket on the Thunderbolt port and replace the two (M2.5x5) screws that secure the metal bracket to
the system board.
6 Place the DC-in metal bracket on the power port and replace the two (M2.5x5) screws that secure the metal bracket to the system
board.
7 Connect the coin cell battery and hard drive cable to the connector on the system board.
8 Install the:
a back cover
b rear cover
c memory module
d WLAN card
e HDD
f SSD card
g battery
h base cover
9 Follow the procedure in After working inside your computer .
Sådan fjernes og installeres komponenter 33