Dell Vostro 15-7580, Руководство пользователя

Страница: 28 / 105

BEMÆRK: For complete replacement of the back cover, the following parts need to be removed: the Memory, System
Board, Speakers and DC-In cable.
Installing the back cover
1 Press the edges of the back cover until it clicks into place.
2 Close the display assembly and turn over the system.
3 Replace the four (M2x3) and nineteen (M2.5x6) screws to secure the back cover to the system.
4 Connect the power, LED and Keyboard backlight cable, touchpad cable, keyboard cable to the connectors in the system board and
affix the adhesive tape over the keyboard cable.
5 Route the eDP cable through the routing channel and connect the cable to the system.
6 Place the eDP metal bracket and replace the M2x3 screw to secure the eDP to the system.
7 Route the camera and WLAN antenna cables through the routing channel and connect the camera cable to the system board.
8 Install the:
a WLAN card
b rear cover
c battery
d base cover
9 Follow the procedure in After working inside your computer .
Højttaler
Removing the speaker
1 Follow the procedure in Before working inside your computer .
2 Remove the:
a base cover
b battery
28 Sådan fjernes og installeres komponenter