Dell Vostro 15-7580 Скачать руководство пользователя страница 80

Страница: 80 / 105

Option

Description

USB Configuration

Allows you to enable or disable the internal/integrated USB

configuration.

The options are:

•

Enable USB Boot Support

•

Enable External USB Ports

All the options are set by default.

BEMÆRK:

USB keyboard and mouse always work in the

BIOS setup irrespective of these settings.

Thunderbolt Adapter Configuration

Allows you to configure the Thunderbolt adapter security settings

within the operating system.

The options are:

•

Enable Thunderbolt Technology Support

—Default

•

Enable Thunderbolt Adapter Boot Support

•

Enable Thunderbolt Adapter Pre-boot Modules

Choose any one option:

•

Security level - No Security

•

Security level - User Authorization

—Default

•

Security level - Secure Connect

•

Security level - Display Port Only

USB PowerShare

This field configures the USB PowerShare feature behavior. This

option allows you to charge external devices using the stored

system battery power through the USB PowerShare port (disabled

by default).

•

Enable USB PowerShare

Audio

Allows you to enable or disable the integrated audio controller. By

default, the

Enable Audio

option is selected.

The options are:

•

Enable Microphone

•

Enable Internal Speaker

This option is set by default.

Keyboard Illumination

This field lets you choose the operating mode of the keyboard

illumination feature. The keyboard brightness level can be set from

0% to 100%.

The options are:

•

Disabled

•

Dim

•

Bright

—Default

Keyboard Backlight Tmeout on AC

Allows to define the timeout value for the keyboard backlight when

an AC adapter is plugged in the system. The Keyboard Backlight

tiemout value is only in effect when the backlight is enabled.

•

5 seconds

•

10 seconds

—Default

Systeminstallationsmenu

Содержание Vostro 15-7580










































































































Результаты поиска

Содержание Vostro 15-7580

Отзывы:

Похожие инструкции для Vostro 15-7580

Бренды по названию

Популярные бренды

Dell Vostro 15-7580, Руководство пользователя

Результаты поиска

Содержание Vostro 15-7580

Отзывы:

Похожие инструкции для Vostro 15-7580

Бренды по названию

Популярные бренды