Dell Vostro 15 7510 Скачать руководство пользователя страница 73 | Manualshive

Страница: 73 / 85

background image

Table 11. System setup options—Passwords menu (continued)

Passwords

Password Bypass

When enabled, this always prompts for computer and internal hard drive
passwords when powered on from the off state.

By default, the

Disabled

option is enabled.

Password Changes

Enable Non-Admin Password Changes

Enable or disable to change computer and hard drive password without the
need for admin password.

By default, the option is enabled.

Admin Setup Lockout

Enable Admin Setup Lockout

Enables administrators control over how their users can or cannot access BIOS
setup.

By default, the option is disabled.

Master Password Lockout

Enable Master Password Lockout

When enabled, this will disable the master password support.

By default, the option is disabled.

Allow Non-Admin PSID Revert

Enable Allow Non-Admin PSID Revert

Controls access to the Physical Security ID (PSID) revert of NVMe hard-drives
from the Dell Security Manager prompt.

By default, the option is disabled.

Table 12. System setup options—Update, Recovery menu

Update, Recovery

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

By default, the option is enabled.

BIOS Recovery from Hard Drive

Enables the user to recover from certain corrupted BIOS conditions from a
recovery file on the user primary hard drive or an external USB key.

By default, the option is enabled.

BIOS Downgrade

Allow BIOS Downgrade

Enable or disable the flashing of the computer firmware to previous revision is
blocked.

By default, the option is enabled.

SupportAssist OS Recovery

Enable or disable the boot flow for SupportAssist OS Recovery tool in the
event of certain computer errors.

By default, the option is enabled.

BIOSConnect

Enable or disable cloud Service OS recovery if the main operating system fails
to boot with the number of failures equal to or greater than the value specified
by the Auto OS Recovery Threshold setup option and local Service OS does not
boot or is not installed.

By default, the option is enabled.

Dell Auto OS Recovery Threshold

Controls the automatic boot flow for SupportAssist System Resolution Console
and for Dell OS Recovery Tool.

By default, the threshold value is set to 2.

System setup

73

«
...
71
72
73
74
75
...
»

Содержание Vostro 15 7510






















































































Отзывы:

Нет отзывов

Похожие инструкции для Vostro 15 7510

Toughbook CF-29LCQGCBM

Бренд: Panasonic Страницы: 3

ThinkPad R50 Series

Бренд: IBM Страницы: 2

Satellite C50-K

Бренд: dynabook Страницы: 46

Бренд: IBM Страницы: 170

LifeBook B-2130

Бренд: Fujitsu Страницы: 103

Бренд: Fujitsu Страницы: 112

LifeBook B Series

Бренд: Fujitsu Страницы: 120

Бренд: Fujitsu Страницы: 174

LifeBook B-2545

Бренд: Fujitsu Страницы: 96

Бренд: Lenovo Страницы: 137

Бренд: Lenovo Страницы: 4

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 3

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 3

Бренд: Samsung Страницы: 2

Бренд: Samsung Страницы: 4

Бренд: Samsung Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды