Dell SonicWALL SRA 4200/1200 Getting Started Guide
32
Allowing an SRA -> LAN Connection
When users have connected to the SRA, they need to be able
to connect to resources on the LAN. To allow an SRA to LAN
connection, perform the following steps:
1.
Navigate to the
Network > Address Objects
page.
2.
In the 'Address Objects' section, click
.
3.
In the 'Add Address Object' dialog box, create an
address
object
for the X0 interface IP address of your SRA
appliance:
4.
Click
Add
to create the object. Once done, click
Close
.
5.
Click
again to create an address object for
the NetExtender range.
6.
In the 'Add Address Object' dialog box, create an
address
object
for the X0 interface IP address of the SRA
appliance:
7.
Click
Add
to create the object. Once done, click
Close
.
8.
On the 'Network > Address Objects' page, in the ‘Address
Groups’ section, click
.
9.
In the 'Add Address Object Group' dialog box, create a
group
for the X0 interface IP address of your SRA
appliance and the NetExtender IP range:
• Enter a
name for the group
.
• In the left column, select the
two groups
you created and
click the right arrow button
.
• Click
OK
to create the group when both objects are in the
right column.
Name
Name for the SRA Appliance
Zone Assignment
SRA
Type
Host
IP Address
SRA appliance’s 'X0' IP
address
, 192.168.200.1 by
default
Name
Name for NetExtender
Zone Assignment
SRA
Type
Range
Starting IP Address
Start of the NetExtender
IP address range
,
192.168.200.100 by
default
Ending IP Address
End of the NetExtender
IP address range
,
192.168.200.200 by
default