SonicWALL Internet Security Appliance Guide Page 87
Add A New Rule
1. Click
Add New Rule...
to open the
Add Rule
window.
2. Select
Allow or Deny
in the
Action
menu depending upon whether the rule is
intended to permit or block IP traffic.
3. Select the name of the service affected by the
Rule from the Service
menu. If
the service is not listed, you need to define the service in the
Add Service
window.
The
Default
service encompasses all IP services.
4. Select the source of the traffic affected by the rule, either LAN, WAN, DMZ, or *,
from the
Source Ethernet
menu.
If you want to define the source IP addresses that are affected by the rule, such
as restricting certain users from accessing the Internet, enter the starting IP
addresses of the address range in the
Addr Range Begin
field and the ending IP
address in the
Addr Range End
field. To include all IP addresses, enter * in the
Addr Range Begin
field.
5. Select the destination of the traffic affected by the rule, either LAN, WAN, DMZ, or
*, from the
Destination Ethernet
menu.
If you want to define the destination IP addresses that are affected by the rule, for
example, to allow inbound Web access to several Web servers on your LAN, enter
the starting IP addresses of the address range in the
Addr Range Begin
field and
the ending IP address in the
Addr Range End
field. To include all IP addresses,
enter * in the
Addr Range Begin
field.
6. Select
Apply this rule "always"
if the rule is always in effect.
Select
Apply this rule "from"
to define the specific time and day of week to
enforce the rule. Enter the time of day (in 24-hour format) to begin and end
enforcement. Then select the day of week to begin and end enforcement.
integrated_manual.book Page 87 Wednesday, June 13, 2001 6:21 PM
