Dell SonicWALL GX250 Скачать руководство пользователя

Страница: 71 / 200

SonicWALL Internet Security Appliance Guide Page 71

2. Click

Browse

to locate a settings file which was saved using

Export

3. Once the file is selected, click

Import

4. Restart the SonicWALL for the settings to take effect.

Note

: The Web browser used to Import Settings must support HTTP uploads.

Netscape Navigator 3.0 and above is recommended. Netscape Navigator may be

downloaded at <http://www.netscape.com>

Restoring Factory Default Settings

You can erase the SonicWALL configuration settings and restore the SonicWALL to its
factory default state.

1. Click

Restore

on the

Preferences

tab to restore factory default

settings.

2. Click

Yes

, and then restart the SonicWALL for the change to take effect.

Note

: The SonicWALL LAN IP Address, LAN Subnet Mask, and the Administrator

Password is not reset.

Updating Firmware

The SonicWALL has flash memory and may be easily upgraded with new firmware.
Current firmware may be downloaded from SonicWALL, Inc. Web site directly into the
SonicWALL.

Note

: Firmware updates are only available to registered users. You may register your

SonicWALL online at <http://www.mysonicwall.com>

integrated_manual.book Page 71 Wednesday, June 13, 2001 6:21 PM

Содержание SonicWALL GX250









































































































































































































Результаты поиска

Содержание SonicWALL GX250

Отзывы:

Похожие инструкции для SonicWALL GX250

Бренды по названию

Популярные бренды

Dell SonicWALL GX250, Руководство пользователя

Результаты поиска

Содержание SonicWALL GX250

Отзывы:

Похожие инструкции для SonicWALL GX250

Бренды по названию

Популярные бренды