Dell S2830dn Скачать руководство пользователя страница 99

Страница: 99 / 153

Use recommended paper

•

Use only recommended paper or specialty media.

•

Do not load wrinkled, creased, damp, bent, or curled paper.

•

Flex, fan, and straighten paper before loading it.

•

Do not use paper that has been cut or trimmed by hand.

•

Do not mix paper sizes, weights, or types in the same tray.

•

Make sure the paper size and type are set correctly on the computer or printer control panel.

•

Store paper according to manufacturer recommendations.

Identifying jam locations

Notes:

•

When Jam Assist is set to On, the printer automatically ﬂushes blank pages or pages with partial prints
after a jammed page has been cleared. Check your printed output for blank pages.

•

When Jam Recovery is set to On or Auto, the printer reprints jammed pages.

Jam location

Standard bin

Multipurpose feeder

Tray 1

Tray [x]

Front door

Rear door

Clearing jams

Содержание S2830dn


























































































































































Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды

Dell S2830dn, Руководство пользователя

Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды