Dell S2830dn Скачать руководство пользователя страница 54

Страница: 54 / 153

Use

Portrait Width

3–8.5 inches

76–216 mm

Set the portrait width.

Notes:

•

If the width exceeds the maximum, then the printer uses the
maximum width allowed.

•

8.5 inches is the US factory default setting. You can increase
the width in 0.01

‑

inch increments.

•

216 mm is the international factory default setting. You can
increase the width in 1

‑

mm increments.

Portrait Height

3–14.17 inches

76–360 mm

Set the portrait height.

Notes:

•

If the height exceeds the maximum, then the printer uses the
maximum height allowed.

•

14 inches is the US factory default setting. You can increase the
height in 0.01

‑

inch increments.

•

356 mm is the international factory default setting. You can
increase the height in 1

‑

mm increments.

Feed Direction

Short Edge

Long Edge

Specify the feed direction if the paper can be loaded in either
direction.

Notes:

•

Short Edge is the factory default setting.

•

Long Edge appears only when the longest edge is shorter than
the maximum width supported in the tray.

Reports menu

Use

Menu Settings Page

Print a report containing information about the paper loaded in trays,
installed memory, total page count, alarms, timeouts, control panel
language, TCP/IP address, status of supplies, status of the network
connection, and other information.

Device Statistics

Print a report containing printer statistics, such as supply information and
details about printed pages.

Network Setup Page

Print a report containing information about the network printer settings, such
as the TCP/IP address information.

Note:

This menu item appears only in network printers or in printers

connected to print servers.

Proﬁles List

Print a list of proﬁles stored in the printer.

Note:

This menu item appears only when LDSS is enabled.

Understanding the printer menus

Содержание S2830dn


























































































































































Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды

Dell S2830dn, Руководство пользователя

Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды