Dell S2830dn Скачать руководство пользователя страница 114

Страница: 114 / 153

Load [paper source] with [paper type] [paper size] [orientation]

Try one or more of the following:

•

Load the tray or feeder with the correct size and type of paper.

•

From the printer control panel, press

to clear the message and continue printing.

Note:

If the printer ﬁnds a tray that has the correct size and type of paper, then it feeds from that

tray. If the printer cannot ﬁnd a tray that has the correct size and type of paper, then it prints from the
default paper source.

•

Cancel the current job.

Memory full [38]

Try one or more of the following:

•

From the printer control panel, press

to clear the message.

•

Decrease the resolution setting.

•

Install additional printer memory.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

•

Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the

User’s Guide

•

If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Note:

If the message appears after reinstalling the supply, then the cartridge is defective. Replace

the toner cartridge.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

•

Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the

User’s Guide

•

If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Note:

If the message appears after reinstalling the supply, then the imaging unit is defective.

Replace the imaging unit.

Replace cartridge, 0 estimated pages remain [88.xy]

Replace the toner cartridge to clear the message and continue printing. For more information, see the
instruction sheet that came with the supply or see the “Replacing supplies” section of the

User’s Guide

Note:

If you do not have a replacement cartridge, then visit our Web site or contact the place where you

purchased the printer.

Troubleshooting

114

Содержание S2830dn


























































































































































Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды

Dell S2830dn, Руководство пользователя

Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды