Dell S2830dn Скачать руководство пользователя страница 143

Страница: 143 / 153

Action

Yes

Step 3

Check if you are using a recommended type of paper.

Load the indicated tray or feeder with a recommended type of
paper.

Resend the print job.

Do vertical voids appear on prints?

Go to step 4.

The problem is
solved.

Step 4

Redistribute the toner in the imaging unit.

Remove the toner cartridge, and then the imaging unit.

Firmly shake the imaging unit.

Warning—Potential Damage:

Do not expose the imaging

unit to direct light for more than 10 minutes. Extended
exposure to light may cause print quality problems.

Reinstall the imaging unit, and then the cartridge.

Resend the print job.

Do vertical voids appear on prints?

Contact

technical

support

Note:

The laser

scanning unit may
be defective.

The problem is
solved.

Toner specks appear on prints

Action

Yes

Replace the imaging unit, and then resend the print job.

Do toner specks appear on prints?

Contact

technical

support

The problem is
solved.

Uneven print density

Action

Yes

Replace the imaging unit, and then resend the print job.

Is the print density uneven?

Contact

technical

support

The problem is
solved.

Troubleshooting

143

Содержание S2830dn


























































































































































Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды

Dell S2830dn, Руководство пользователя

Результаты поиска

Содержание S2830dn

Отзывы:

Бренды по названию

Популярные бренды