Setting Up the Monitor
|
17
Setting Up the Monitor
Attaching the Stand
NOTE:
The stand riser and stand base are detached when the monitor is shipped
from the factory.
NOTE:
The procedure below is applicable for the default stand. If you purchased
any other stand, see the documentation shipped with the stand to set it up.
CAUTION: Place monitor on a flat, clean, and soft surface to avoid scratching the
display panel.
To attach the monitor stand:
1
Remove the monitor protective cover and place the moitor with its front facing
downward on it.
2
Align the stand bracket with the monitor groove.
3
Insert the stand bracket into monitor groove till it snaps into its place.
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
Safety Instructions
.
To connect your monitor to the computer:
1
Turn off your computer.
2
Connect the VGA (Optional)/HDMI cable from your monitor to the computer.
3
Place the Speaker into monitor stand.
4
Connect the mini DIN cable of Speaker to the monitor.
5
Put cable holder of Speaker to the monitor stand.
6
Switch on your monitor.
7
Select the correct input source at Monitor OSD Menu and turn on your
computer.
