Dell QLE8262, Руководство пользователя

Страница: 116 / 261

3–Adapter Management Applications
Windows Management Applications
101 CU0354602-00 L
Windows Diagnostic Test Descriptions
This section provides descriptions of the following Windows diagnostic tests.
 Hardware Test
The hardware test checks the status of various hardware blocks, including
DMA engines, receive engine, and on-board processor meta cores.
 Register Test
The register test performs device register read/write accesses.
 Interrupt Test
The interrupt test checks the ability of the hardware to create an interrupt
and the ability of the driver to process the interrupt by forcing the generation
of a predetermined number of interrupts. The test succeeds if the device
generates the interrupts and the driver processes all interrupts expected.
 External Loopback Test
The external loopback test verifies the transmit and receive path by sending
a packet out onto an external loopback cable.
 Internal Loopback Test
The internal loopback test verifies the capability of the ProductLine to
internally loop back packets.
Link
qaucli -nic -testlink [ cna_port_inst ]
Ping (IPv4)
qaucli -nic -ping < cna_port_inst > < hostname_or_IPv4 >
[< count > < pocket_size > < timeout_ms > < TTL >]
where the default values are
< count >
=5,
< pocket_size >
=525,
< time-
out_ms >
=1000, and
< TTL >
=30.
Register
qaucli -nic -testregister [ cna_port_inst ]
Transceiver
DMI Data
qaucli -nic -trans [ cna_port_inst ]
Table 3-8. Running Windows Diagnostic Tests in the CLI (Continued)
Test Type Command