Dell QLE8262, Руководство пользователя

Страница: 108 / 261

3–Adapter Management Applications
Windows Management Applications
93 CU0354602-00 L
To preview a VLAN before removing it from a port or team, issue the following
command to list the indices to use in the
-vlandel
command:
qaucli -nic -vlandel_preview
To remove a VLAN from a port or team, issue the following command:
qaucli -nic -vlandel < list_insts |ALL> < vlan_id |ALL>
where
list_insts
specifies the comma-separated port indices (for
example, 1,2) and
vlan_id
specifies a comma-separated numeric value
(for example, 1...4095 or 100,555). Use the
-vlandel_preview
command
to preview list indices.
To view the content of VLAN and teaming state configuration, issue the following
command:
qaucli -nic -vtcfgview [ state_cfg_file ]
To save the VLAN and teaming state configuration, issue the following command:
qaucli -nic -vtsave [ state_cfg_file ]
To restore VLAN and teaming state configuration, issue the following command:
qaucli -nic -vtrestore [ state_cfg_file ]
Using the GUI for VLANs
You can use the Team Management GUI to perform the following VLAN activities:
 Adding and Configuring a VLAN
 Deleting a VLAN
 Viewing VLAN Statistics
Adding and Configuring a VLAN
Use the Team Management page to add VLAN on a team, either directly on an
unteamed adapter or on an unteamed adapter while configuring parameters for
the adapter’s NIC driver. Whenever a team is created, a virtual adapter is implicitly
created that becomes the default VLAN for the team. There can be only one
untagged VLAN on a team.
Multiple virtual adapters can be created on top of the teamed adapter by creating
different instances with different VLAN IDs assigned to each.
NOTE
In the preceding commands, if the
state_cfg_file
option is not
specified, the default file is
vtstate.cfg
in the installation directory.