Dell Precision Workstation 350, Руководство по установке и краткому справочнику

Страница: 29 / 164

S e t u p a n d Q u i c k Re f e r e n c e G u i d e
29
Possible system board
failure. Perform the procedures in "System Board Problems" in
your
User’s Guide .
If the problem persists, contact Dell.
Memory modules are
detected, but a memory
configuration or
compatibility error exists. Ensure that there are no special memory
module/memory connector placement requirements (see
"Memory" in your
User’s Guide ).
Verify that the memory modules that you are installing
are compatible with your computer (see "Memory" in
your
User’s Guide ).
Reinstall the memory modules and then restart the
computer.
If the problem persists, contact Dell.
Possible system board
resource and/or hardware
failure. Perform the procedure in "System Board Problems" and
see "Resolving Software and Hardware Incompatibilities"
in your
User’s Guide
.
If the problem persists, contact Dell.
Possible expansion card
failure.
1
Determine if a conflict exists by removing a card (not
the video card) and then restarting the computer.
2
If the problem persists, reinstall the card that you
removed, remove a different card, and then restart the
computer.
3
Repeat this process for each card. If the computer
starts normally, troubleshoot the last card removed
from the computer for resource conflicts (see
"Resolving Software and Hardware Incompatibilities"
in your
User’s Guide ).
4
If the problem persists, contact Dell.
Other failures has
occurred. Ensure that the cables are properly connected from the
hard drive, CD drive, and DVD drive to the system
board.
If the problem persists, contact Dell.
Light Pattern Problem Description Suggested Resolution
GYYG
GYGY
GYGG
GGYY
GGGY