Dell Precision M4800 Скачать руководство пользователя страница 60

Страница: 60 / 83

Option

Description

•

SATA-2

•

SATA-3

•

SATA-4

•

SATA-5

•

Zero Power ODD

Default Setting: The highlighted devices are

enabled.

SMART Reporting

This field controls if the hard drive errors for

the integrated drives are reported during

system startup. This technology is part of the

SMART (Self Monitoring Analysis and

Reporting Technology) specification. This

option is disabled by default.

•

Enable SMART Reporting

USB Configuration

Allows you to define the USB configuration.

The options are:

•

Enable Boot Support

•

Enable USB 3.0 Controller

•

Enable External USB Port

Default Setting: All the options are enabled.

USB PowerShare

Allows you to configure the behavior of the

USB PowerShare feature. The option is

disabled by default.

•

Enable USB PowerShare

Audio

This field enables or disables the integrated

audio controller.

•

Enable Audio (Default Setting)

Keyboard Illumination

This field lets you choose the operating mode

of the keyboard illumination feature.

•

Disabled (Default Setting)

•

Level is 25%

•

Level is 50%

•

Level is 75%

•

Level is 100%

Unobtrusive Mode

When enabled, pressing Fn+B will turn Off all

light and sound emissions in the system. Press

Fn+B to resume normal operation. The option

is disabled by default.

•

Enable Unobtrusive Mode

Содержание Precision M4800




















































































Результаты поиска

Содержание Precision M4800

Отзывы:

Dell Precision M4800, Руководство пользователя, Страница: 60 / 83

Результаты поиска

Содержание Precision M4800

Отзывы: